Show Interface Wireless - SMC Networks EliteConnect SMC2555W-AG2 User Manual

7
Command Line Interface

show interface wireless

This command displays the status for the wireless interface.
Syntax
show interface wireless <a | g> vap-id
• a - 802.11a radio interface.
• g - 802.11g radio interface.
• vap-id - The number that identifies the VAP interface. (Options: 0~7)
Command Mode
Exec
Example
Enterprise AP#show interface wireless g 0
Wireless Interface Information
=========================================================================
----------------Identification-------------------------------------------
Description
SSID
Channel
Status
MAC Address
----------------802.11 Parameters----------------------------------------
Radio Mode
Protection Method
Transmit Power
Max Station Data Rate
Multicast Data Rate
Fragmentation Threshold
RTS Threshold
Beacon Interval
Authentication Timeout Interval : 60 Mins
Association Timeout Interval
DTIM Interval
Preamble Length
Maximum Association
MIC Mode
Super G
VLAN ID
----------------Security-------------------------------------------------
Closed System
Multicast cipher
Unicast cipher
WPA clients
WPA Key Mgmt Mode
WPA PSK Key Type
WPA PSK Key
PMKSA Lifetime
Encryption
Default Transmit Key
Common Static Keys
Pre-Authentication
Authentication Type
7-110
: Enterprise 802.11g Access Point
: SMC_VAP_G 0
: 1 (AUTO)
: ENABLED
: 00:03:7f:fe:03:02
: b & g mixed mode
: CTS only
: FULL (16 dBm)
: 54Mbps
: 5.5Mbps
: 2346 bytes
: 2347 bytes
: 100 TUs
: 30 Mins
: 1 beacon
: LONG
: 64 stations
: Software
: Disabled
: 1
: Disabled
: WEP
: TKIP and AES
: DISABLED
: PRE SHARED KEY
: PASSPHRASE
: EMPTY
: 720 minutes
: ENABLED
: 1
: Key 1: EMPTY
Key 3: EMPTY
: DISABLED
: SHARED
Key 2: EMPTY
Key 4: EMPTY