ZyXEL Communications ZYWALL USG 2000 Manual page 762

Unified security gateway

Hide thumbs Also See for ZYWALL USG 2000:

Table of Contents

Chapter 47 Logs

To access this screen, click Maintenance > View Log. The log is displayed in the

following screen.

Figure 507 Maintenance > Log > View Log

Events that generate an alert (as well as a log message) display in red. Regular

logs display in black. The following table describes the labels in this screen.

Table 246 Maintenance > Log > View Log

Show Filter /

Click this button to show or hide the filter settings.

If the filter settings are hidden, the Display, Email Log Now, Refresh,

and Clear Log fields are available.

If the filter settings are shown, the Display, Priority, Source Address,

Destination Address, Service, Keyword, and Search fields are

These fields and buttons display when you hide the filter.

Select the log(s) you want to view. You can also view All Logs on one

screen, or you can view the Debug Log. The screen is updated right

after you change the selection.

Click this button to send the selected log message(s) to the Active e-

mail address(es) specified in the Send Log To field on the Log Settings

Section 47.4.1 on page 765

for more information about these fields.)

Click this button to update the information on the log screen.

Click this button to clear the whole log, regardless of what is currently

displayed on the screen.

These fields are displayed when you show the filter. When the filter is

shown, the filter criteria are not applied until you click the Search

Select the log message(s) you want to view. You can also view All Logs

at one time, or you can view the Debug Log.

This field is read-only if the Category is Debug Log. Select the lowest-

priority log messages you would like to see. The log will display every log

message with this priority or higher. Choices are: any, emerg, alert,

crit, error, warn, notice, and info, from highest priority to lowest

Section 47.4.2 on page 766

ZyWALL USG 2000 User's Guide

Troubleshooting