Port Grouping Screen - ZyXEL Communications ZYWALL USG 2000 Manual

In this case, click
like this.
Figure 128 Port Grouping Example: Screen
There are no ports assigned to ge4. If you do not assign any physical ports to a
representative interface, you cannot use this interface to create other interfaces
or create IPSec VPN tunnels. The Ethernet interface is still displayed in the screen,
however, and the existing configuration remains.

10.3.2 Port Grouping Screen

Define the relationship between physical ports, port groups, and Ethernet
interfaces in the Port Grouping screen. Port grouping does not apply to ports 7
and 8 (the dual-personality Ethernet port and SFP slot pairs). The are always
assigned to interfaces ge7 and ge8, respectively. To access this screen, click
Network > Interface > Port Grouping.
Figure 129 Network > Interface > Port Grouping
ZyWALL USG 2000 User's Guide
Network > Interface > Port
Chapter 10 Interface
Grouping, and set up the screen
189