Snmp - ZyXEL Communications ZYWALL USG 2000 Manual

Unified security gateway
Hide thumbs Also See for ZYWALL USG 2000:
Table of Contents

Advertisement

Table 236 System > FTP (continued)
LABEL
Action
Add icon
Apply
Reset

45.10 SNMP

Simple Network Management Protocol is a protocol used for exchanging
management information between network devices. Your ZyWALL supports SNMP
agent functionality, which allows a manager station to manage and monitor the
ZyWALL through the network. The ZyWALL supports SNMP version one (SNMPv1)
ZyWALL USG 2000 User's Guide
DESCRIPTION
This displays whether the computer with the IP address specified above
can access the ZyWALL zone(s) configured in the Zone field (Accept) or
not (Deny).
Click the Add icon in the heading row to open a screen where you can
add a new rule. Refer to
fields.
Click the Edit icon to go to the screen where you can edit the rule.
Click the Add icon in an entry to add a rule below the current entry.
Click the Delete icon to remove an existing rule. A window display asking
you to confirm that you want to delete the rule. Note that subsequent
rules move up by one when you take this action.
Click the Move to N icon to display a field to type a number for where
you want to put that rule and press [ENTER] to move the rule to the
number that you typed.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Table 232 on page 716
for information on the
Chapter 45 System
737

Advertisement

Table of Contents
loading

Table of Contents