ZyXEL Communications ZYWALL USG 2000 Manual page 210

Chapter 10 Interface
Table 56 Interface > Cellular > Add (continued)
LABEL
Authentication
Type
User Name
Password
Retype to
Confirm
SIM Card Setting
PIN Code
Interface
Parameters
Egress
Bandwidth
Ingress
Bandwidth
210
DESCRIPTION
The ZyWALL supports PAP (Password Authentication Protocol) and
CHAP (Challenge Handshake Authentication Protocol). CHAP is more
secure than PAP; however, PAP is readily available on more platforms.
Use the drop-down list box to select an authentication protocol for
outgoing calls. Options are:
None: No authentication for outgoing calls.
CHAP - Your ZyWALL accepts CHAP requests only.
PAP - Your ZyWALL accepts PAP requests only.
This field displays when you select an authentication type other than
None. This field is read-only if you selected Device in the profile
selection. If this field is configurable, enter the user name for this 3G
card exactly as the service provider gave it to you.
You can use 1 ~ 64 alphanumeric and #:%-_@$./ characters. The first
character must be alphanumeric or -_@$./. Spaces are not allowed.
This field displays when you select an authentication type other than
None. This field is read-only if you selected Device in the profile
selection and the password is included in the 3G card's profile. If this
field is configurable, enter the password for this SIM card exactly as
the service provider gave it to you.
You can use 0 ~ 63 alphanumeric and `~!@#$%^&*()_-
+={}|;:'<,>./ characters. Spaces are not allowed.
This field displays when you select an authentication type other than
None. This field is read-only if you selected Device in the profile
selection and the password is included in the 3G card's profile. If this
field is configurable, re-enter the password for this SIM card exactly
as the service provider gave it to you.
This field displays with a GSM or HSDPA 3G card. A PIN (Personal
Identification Number) code is a key to a 3G card. Without the PIN
code, you cannot use the 3G card.
Enter the 4-digit PIN code (0000 for example) provided by your ISP. If
you enter the PIN code incorrectly, the 3G card may be blocked by
your ISP and you cannot use the account to access the Internet.
If your ISP disabled PIN code authentication, enter an arbitrary
number.
Click Advanced to display more settings. Click Basic to display fewer
settings.
Enter the maximum amount of traffic, in kilobits per second, the
ZyWALL can send through the interface to the network. Allowed
values are 0 - 1048576. This setting is used in WAN load balancing
and bandwidth management.
This is reserved for future use.
Enter the maximum amount of traffic, in kilobits per second, the
ZyWALL can receive from the network through the interface. Allowed
values are 0 - 1048576.
ZyWALL USG 2000 User's Guide