Reports; Chapter 48 Reports; Overview; What You Can Do In The Report Screens - ZyXEL Communications ZYWALL USG 2000 Manual

C
H A P T E R

48.1 Overview

This chapter provides information about the report screens. Use the Report
screens to start or stop data collection and view various statistics about traffic
passing through your ZyWALL.
Note: Data collection may decrease the ZyWALL's traffic throughput rate.

48.1.1 What You Can Do in the Report Screens

• Use the Traffic Statistics screen (see
stop data collection and view statistics.
• Use the Session screen (see
user or service.
• Use the Anti-Virus screen (see
collection and view virus statistics.
• Use the IDP screen
and view IDP statistics.
• Use the Anti-Spam screen
collection and view spam statistics.
• Use the Email Daily Report screen
where and how to send daily reports and what reports to send.

48.2 The Traffic Statistics Screen

Click Maintenance > Report > Traffic Statistics to display the Traffic
Statistics screen. This screen provides basic information about the following for
example:
• Most-visited Web sites and the number of times each one was visited. This count
may not be accurate in some cases because the ZyWALL counts HTTP GET
packets. Please see
• Most-used protocols or service ports and the amount of traffic on each one
ZyWALL USG 2000 User's Guide
Section 48.2 on page
Section 48.3 on page
Section 48.4 on page
(Section 48.5 on page
(Section 48.7 on page
(Section 48.8 on page
Table 251 on page 776
48

Reports

775) to start or
778) to view sessions by
781) to start or stop data
783) to start or stop data collection
787) to start or stop data
790) to configure
for more information.
775