Ethernet Summary Screen - ZyXEL Communications ZYWALL USG 2000 Manual

Unified security gateway

Hide thumbs Also See for ZYWALL USG 2000:

Table of Contents

Chapter 10 Interface

Each section in this screen is described below.

Table 48 Network > Interface > Port Grouping

Representative

Interface (ge1,

ge2, ge3, ge4,

Physical Port (1,

2, 3, 4, 5, 6)

10.4 Ethernet Summary Screen

This screen lists every Ethernet interface and virtual interface created on top of

Ethernet interfaces. To access this screen, click Network > Interface.

Figure 130 Network > Interface > Ethernet

These are Ethernet interfaces. To add a physical port to a

representative interface, drag the physical port onto the

corresponding representative interface.

These are the physical ports as they appear on the front panel of the

ZyWALL. To add a physical port to a representative interface, drag the

physical port onto the corresponding representative interface.

Click this button to save your changes and apply them to the ZyWALL.

Click this button to change the port groups to their current

configuration (last-saved values).

ZyWALL USG 2000 User's Guide