The Shell Script Screen - ZyXEL Communications ZYWALL USG 2000 Manual

Unified security gateway

Hide thumbs Also See for ZYWALL USG 2000:

Table of Contents

Chapter 46 File Manager

If the upload was not successful, the following message appears in the status bar

at the bottom of the screen.

Figure 503 Firmware Upload Error

46.4 The Shell Script Screen

Use shell script files to have the ZyWALL use commands that you specify. Use a

text editor to create the shell script files. They must use a ".zysh" filename

Click Maintenance > File Manager > Shell Script to open the Shell Script

screen. Use the Shell Script screen to store, name, download, upload and run

shell script files. You can store multiple shell script files on the ZyWALL at the

Note: You should include

use multiple

Figure 504 Maintenance > File Manager > Shell Script

Each field is described in the following table.

Table 245 Maintenance > File Manager > Shell Script

File Name This column displays the label that identifies a shell script file.

commands in your scripts. If you do not use the

command, the changes will be lost when the ZyWALL restarts. You could

commands in a long script.

This column displays the number for each shell script file entry.

This column displays the size (in KB) of a shell script file.

This column displays the date and time that the individual shell script files

were last changed or saved.

ZyWALL USG 2000 User's Guide