Address Group Summary Screen - ZyXEL Communications ZYWALL USG 2000 Manual

Unified security gateway

Hide thumbs Also See for ZYWALL USG 2000:

Table of Contents

Chapter 37 Addresses

Table 192 Object > Address > Address > Edit (continued)

37.3 Address Group Summary Screen

The Address Group screen provides a summary of all address groups. To access

this screen, click Object > Address > Address Group.

Figure 416 Object > Address > Address Group

The following table describes the labels in this screen. See

for more information as well.

Table 193 Object > Address > Address Group

Click OK to save your changes back to the ZyWALL.

Click Cancel to exit this screen without saving your changes.

This field is a sequential value, and it is not associated with a specific

address group.

This field displays the name of each address group.

This field displays the description of each address group, if any.

This column provides icons to add, edit, and remove address groups.

To add an address group, click the Add icon at the top of the column.

The Address Group Add/Edit screen appears.

To edit an address group, click the Edit icon next to the address group.

The Address Group Add/Edit screen appears.

To delete an address group, click on the Remove icon next to the

address group. The web configurator confirms that you want to delete

the address group.

Section 37.3.1 on page

ZyWALL USG 2000 User's Guide