ZyXEL Communications ZYWALL USG 2000 Manual page 130

Chapter 6 Tutorials
configure the ZyWALL to use the authentication method. Finally, force users to log
in to the ZyWALL before it routes traffic for them.
Click Object > AAA Server > RADIUS > Default. Configure the RADIUS server,
1
and click Apply.
Figure 70 Object > AAA Server > RADIUS > Default
Click Object > Auth. Method. Click the Add icon.
2
Give the new authentication method object a descriptive name, and click the Add
3
icon. Select group radius because the ZyWALL should use the specified RADIUS
server for authentication. Click OK.
Figure 71 Object > Auth. Method > Add
Click System > WWW. In the Authentication section, select the new
4
authentication method in the Client Authentication Method field. Click Apply.
Figure 72 System > WWW (Authentication)
Click Object > User/Group > Setting. In the Force User Authentication
5
Policy section, click the Add icon.
Set up a default policy that forces every user to log in to the ZyWALL before the
6
ZyWALL routes traffic for them. Select Enable. Then, select force in the
Authentication field. Keep the rest of the default settings, and click OK.
130
ZyWALL USG 2000 User's Guide