ZyXEL Communications ZYWALL USG 2000 Manual page 757

The following table describes the labels in this screen.
Table 244 Maintenance > File Manager > Firmware Package
LABEL
Version
Boot
Module
Current
Version
Released
Date
Upload
File
File Path
Browse... Click Browse... to find the .bin file you want to upload. Remember that you
Upload
After you see the Firmware Upload in Process screen, wait two minutes before
logging into the ZyWALL again.
Figure 501 Firmware Upload In Process
Note: The ZyWALL automatically reboots after a successful upload.
The ZyWALL automatically restarts causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Figure 502 Network Temporarily Disconnected
After five minutes, log in again and check your new firmware version in the HOME
screen.
ZyWALL USG 2000 User's Guide
DESCRIPTION
This is the version of the boot module that is currently on the ZyWALL.
This is the firmware version and the date created.
This is the date that the version of the firmware was created.
Type in the location of the file you want to upload in this field or click Browse
... to find it.
must decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two
minutes.
Chapter 46 File Manager
757