The Dynamic Dns Add/Edit Screen - ZyXEL Communications ZYWALL USG 2000 Manual

Unified security gateway

Hide thumbs Also See for ZYWALL USG 2000:

Table of Contents

Chapter 15 DDNS

15.2.1 The Dynamic DNS Add/Edit Screen

The DDNS Add/Edit screen allows you to add a domain name to the ZyWALL or

to edit the configuration of an existing domain name. Click Network > DDNS and

then an Add or Edit icon to open this screen.

Figure 170 Network > DDNS > Add

The following table describes the labels in this screen.

Table 86 Network > DDNS > Add

Profile Name

DDNS Account

Select this check box to use this DDNS entry.

When you are adding a DDNS entry, type a descriptive name for this

DDNS entry in the ZyWALL. You may use 1-31 alphanumeric characters,

underscores(

), or dashes (-), but the first character cannot be a

number. This value is case-sensitive.

This field is read-only when you are editing an entry.

Select the type of DDNS service you are using.

Type the user name used when you registered your domain name. You

can use up to 31 alphanumeric characters and the underscore. Spaces

are not allowed.

For a Dynu DDNS entry, this user name is the one you use for logging

into the service, not the name recorded in your personal information in

the Dynu website.

Type the password provided by the DDNS provider. You can use up to 64

alphanumeric characters and the underscore. Spaces are not allowed.

ZyWALL USG 2000 User's Guide