Service Control Rules; Customizing The Www Login Page - ZyXEL Communications ZYWALL USG 2000 Manual

Unified security gateway

Hide thumbs Also See for ZYWALL USG 2000:

Table of Contents

Chapter 45 System

45.6.5 Service Control Rules

Click Add or Edit in the Service Control table in a WWW, SSH, Telnet, FTP or

SNMP screen to add a service control rule.

Figure 464 System > Service Control Rule Edit

The following table describes the labels in this screen.

Table 232 Edit Service Control Rule

Click System > WWW > Login Page to open the Login Page screen. Use this

screen to customize the Web Configurator login screen. You can also customize

the page that displays after an access user logs into the Web Configurator to

Select ALL to allow or deny any computer to communicate with the

ZyWALL using this service.

Select a predefined address object to just allow or deny the computer

with the IP address that you specified to access the ZyWALL using this

Select ALL to allow or prevent any ZyWALL zones from being accessed

using this service.

Select a predefined ZyWALL zone on which a incoming service is allowed

Select Accept to allow the user to access the ZyWALL from the specified

Select Deny to block the user's access to the ZyWALL from the specified

Click OK to save your customized settings and exit this screen.

Click Cancel to exit this screen without saving

ZyWALL USG 2000 User's Guide