The Application Patrol Edit Screen - ZyXEL Communications ZYWALL USG 2000 Manual

Unified security gateway

Hide thumbs Also See for ZYWALL USG 2000:

Table of Contents

Chapter 28 Application Patrol

Click AppPatrol > Common to open the following screen.

Figure 329 AppPatrol > Common

The following table describes the labels in this screen. See

for more information as well.

Table 129 AppPatrol > Common

Default Access

28.3.1 The Application Patrol Edit Screen

Use this screen to edit the settings for an application. To access this screen, go to

the application patrol Common, Instant Messenger, Peer to Peer, VoIP, or

This field is a sequential value, and it is not associated with a specific

application.

This field displays the name of the application.

This field displays what the ZyWALL does with packets for this

application. Choices are: forward, drop, and reject.

This column provides icons to activate and deactivate each application

and to edit the settings for each one.

To activate or deactivate patrol for an application, click the Active icon

for the corresponding application. Make sure you click Apply to save and

apply the change.

To edit the settings for an application, click the Edit icon next to the

application. The Configuration Edit screen appears.

Click Apply to save your changes back to the ZyWALL.

Click Reset to begin configuring this screen afresh.

Section 28.3.1 on page

ZyWALL USG 2000 User's Guide