Address Group Summary Screen - ZyXEL Communications ZyWall USG 2000 User Manual

Unified security gateway

Hide thumbs Also See for ZyWall USG 2000:

Table of Contents

Chapter 41 Addresses

Table 196 Configuration > Object > Address > Address > Edit (continued)

41.3 Address Group Summary Screen

The Address Group screen provides a summary of all address groups. To access

this screen, click Configuration > Object > Address > Address Group. Click a

column's heading cell to sort the table entries by that column's criteria. Click the

heading cell again to reverse the sort order.

Figure 473 Configuration > Object > Address > Address Group

The following table describes the labels in this screen. See

for more information as well.

Table 197 Configuration > Object > Address > Address Group

If you selected INTERFACE IP, INTERFACE SUBNET, or INTERFACE

GATEWAY as the Address Type, use this field to select the interface of

the network that this address object represents.

Click OK to save your changes back to the ZyWALL.

Click Cancel to exit this screen without saving your changes.

Click this to create a new entry.

Double-click an entry or select it and click Edit to be able to modify the

entry's settings.

To remove an entry, select it and click Remove. The ZyWALL confirms

you want to remove it before doing so.

Select an entry and click Object References to open a screen that

shows which settings use the entry. See

This field is a sequential value, and it is not associated with a specific

address group.

This field displays the name of each address group.

This field displays the description of each address group, if any.

Section 41.3.1 on page

Section 13.3.2 on page 297

ZyWALL USG 2000 User's Guide