Configuring More Connections Advanced Setup - ZyXEL Communications VMG1312-T10C User Manual

Table 6 More Connections: Edit (continued)
LABEL
Max Idle
Timeout
NAT
Back
Apply
Advanced Setup

5.3.2 Configuring More Connections Advanced Setup

Use this screen to edit your Device's advanced WAN settings. Click the Advanced Setup button in
the More Connections Edit screen. The screen appears as shown.
Figure 23 More Connections: Edit: Advanced Setup
The following table describes the labels in this screen.
Table 7 NeMore Connections: Edit: Advanced Setup
LABEL
RIP & Multicast Setup
RIP Direction
RIP Version
VMG1312-T10C User's Guide
DESCRIPTION
Specify an idle time-out in the Max Idle Timeout field when you select Connect on
Demand. The default setting of 0 means the Internet session will not timeout.
If you set the Mode field to Router, you can select SUA Only if you have one public IP
address and want to use NAT.
Otherwise, select None to disable NAT.
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to display the More Connections Advanced Setup screen and edit more
details of your WAN setup.
DESCRIPTION
Select the RIP Direction from None, Both, In Only and Out Only.
You do not configure this field if you set the RIP Direction field to None.
Select the RIP Version from RIP-1, RIP-2B/RIP-2M.
Chapter 5 WAN Setup
49