Table of Contents
Advertisement
6.3.2 Configuring More Connections Advanced Setup
Use this screen to edit your P-660HN-F1A's advanced WAN settings. Click the
Advanced Setup button in the More Connections Edit screen. The screen
appears as shown.
Figure 36 Network > WAN > More Connections: Edit: Advanced Setup
The following table describes the labels in this screen.
Table 23 Network > WAN > More Connections: Edit: Advanced Setup
LABEL
RIP & Multicast Setup
RIP Direction
RIP Version
Multicast
ATM QoS
P-660HN-F1A User's Guide
DESCRIPTION
This section is not available when you configure the P-660HN-F1A
to be in bridge mode.
Select the RIP direction from None, Both, In Only and Out
Only.
Select the RIP version from RIP-1, RIP-2B and RIP-2M.
IGMP (Internet Group Multicast Protocol) is a network-layer
protocol used to establish membership in a multicast group. The
P-660HN-F1A supports IGMP-v1, IGMP-v2 and IGMP-v3.
Select None to disable it.
Chapter 6 WAN Setup
117
Advertisement
Table of Contents
