Connecting A Computer Via Usb; Connecting To Your Computer; Usb Driver Settings; Performing Live With A Plug-In Synthesizer - Roland Fantom-06 Reference Manual

Connecting a Computer via USB

Connecting to Your Computer

Connect the USB COMPUTER port to your computer to exchange
MIDI and audio data between devices.
MEMO
To use this instrument with the "VENDOR" setting, download and
install the necessary driver on your computer. See the Roland
website for details.
https://www .roland .com/global/support/

USB Driver Settings

Here's how to specify the USB driver that's used when connecting
to your computer.
1 .
Press the [MENU] button.
2 .
Touch <SYSTEM>.
3 .
Touch <GENERAL> tab.
4 .
Set the "USB Driver" parameter to "VENDOR".
Parameter Value
VENDOR
USB Driver
GENERIC
5 .
Press the [WRITE] button to save the SYSTEM
settings.
6 .
Turn this unit's power off, and then on again.
142 142
Explanation
Choose this if you want to use a
USB driver downloaded from the
Roland website.
Choose this if you want to use
the standard USB driver that was
included with your computer.
* Only MIDI is available.

Performing Live with a Plug-in Synthesizer

You can use the FANTOM to play a plug-in synthesizer that's
installed on your computer. In this case, you can route the audio
output of your plug-in synthesizer via USB audio into the FANTOM,
so that it is heard from the OUTPUT jacks of the FANTOM.
Performance using
Internal zones
Performance data for
external zones
(USB MIDI)
Plug-in synthesizer installed on the
computer

Using USB Audio

Adjusting the USB Audio Input

Here's how to make settings for audio that's input from a USB-
connected computer.
1 .
Press the [USB AUDIO SELECT] button.
2 .
Touch <SYSTEM>.
3 .
Touch <GENERAL> tab.
The SYSTEM screen's USB tab appears
4 .
Move the cursor to "USB Audio Input Switch", and
change the value to "ON".
Audio input from the connected device turns on.
5 .
Use the cursor to select "USB Audio Input Volume",
and adjust the input level.
Output
Audio from the
computer (USB audio)