Installing By Auto Run - Ricoh Aficio 1022 Operating Instructions Manual

Installing the Printer Driver and Software

Installing by Auto Run

You can install the PCL and the RPCS™ printer drivers and software, and set
them up easily by using Auto Run.
Follow these steps to install the PCL and the RPCS™ printer drivers and soft-
ware on Windows 95/98/Me, Windows 2000, or Windows NT 4.0.
2
Limitation
❒ If your system is Windows 2000 or Windows NT 4.0, installing a printer driv-
er by Auto Run requires Administrators permission. When you install a print-
er driver by Auto Run, log on using an account that has Administrators
permission.
Note
❒ Auto Run might not automatically work with certain OS settings. In this case,
launch "INSTTOOL.EXE" located on the CD-ROM root directory.
❒ If you want to install without using Auto Run, hold down the { { { { SHIFT} } } } key
(when your system is Windows 2000, hold down the left { { { { SHIFT} } } } key) while
inserting the CD-ROM. Keep the { { { { SHIFT} } } } key down until the computer has
finished accessing the CD-ROM.
If [Cancel] is pressed during installation, the installation will be stopped and the
remaining software will not be installed. If [Cancel] has been pressed, re-install
the remaining software after restarting the computer.
A A A A
Close all applications that are running.
B B B B
Insert the CD-ROM into the CD-ROM drive.
C C C C
Follow the instructions on the screen.
D D D D
Restart the computer after installation is complete.
E E E E
Set up the options with the printer driver.
22