User Tools (System Settings)
Settings You Can Change with the User
Tools
Reference
For how to access the User Tools, seep.61 "Accessing the User Tools (System
Settings)".
General Features
❖ ❖ ❖ ❖ Panel Tone
The beeper (key tone) sounds when a key is pressed.
4
Note
❒ Default: ON
❖ ❖ ❖ ❖ Warm Up Notice
Specify whether the beeper sounds when the machine becomes ready for
copying after Energy Saver mode is deactivated or the power is turned on.
Note
❒ If the "Panel Tone"setting is "Off", the beeper does not sound irrespective
of the "Warm Up Notice"setting.
❒ Default: ON
❖ ❖ ❖ ❖ Copy Count Display
The copy counter can be set to show the number of copies made (count up) or
the number of copies remaining to be made (count down).
Note
❒ Default: Up (count up)
❖ ❖ ❖ ❖ Function Priority
You can specify the mode to be displayed immediately after the operation
switch is turned on or System Reset mode is turned on.
Note
❒ Default: Copier
68
1
/
2