Software Supplied On Cd-Rom; Auto-Run Program; Twain Driver - Ricoh en5100wd Operating Instructions Manual

Software Supplied on CD-ROM

This section explains the applications on the supplied CD-ROM.

Auto-Run Program

This section explains the auto-run program.
When the CD-ROM is inserted into a client computer running Windows 2000/XP/Vista or Windows
Server 2003/R2, the installer starts up automatically (auto run) to install various software.
• When you install software, log on as an Administrators group member.
• Auto-run program may not automatically work with certain operating system settings. If this
happens, start "Setup.exe" on the CD-ROM root directory.
• To disable auto-run, set CD-ROM while pressing the Shift key. Keep the Shift key pressed until the
computer finishes reading from the CD-ROM.
• If [Cancel] is pressed during installation, the installation of all the software thereafter will be
stopped. If cancelled, reinstall the remaining software after restarting the client computer.

TWAIN Driver

This section tells you the file path to the TWAIN driver and the TWAIN driver's system requirements.
You must install this driver if you want to scan originals or use the machine as a network TWAIN
scanner.
File path
The TWAIN driver is stored in the following folder on the CD-ROM:
\DRIVERS\TWAIN
System requirements
• Computer hardware
PC/AT-compatible machines that support the operating system properly
This driver cannot be used in RISC-based processor (MIPS R series, Alpha AXP, or PowerPC)
environments.
• Operating system
Microsoft Windows 2000/XP/Vista
Microsoft Windows Server 2003
Microsoft Windows Server 2003 R2
Software Supplied on CD-ROM
171