Interface Settings/Network - Ricoh Aficio 1022 Operating Instructions Manual

Interface Settings/Network

❖ ❖ ❖ ❖ IP Address
Before using this machine with the network environment, you must config-
ure the IP address.
Note
❒ Default: 011.022.033.044
❒ Do not use an IP address that has been used for another machine. To get
the addresses, contact your network administrator.
❒ Press the [← ← ← ← ] or [→ → → → ] key to move between each group of three numbers.
❒ Press [Clear] if you enter the wrong number.
❖ ❖ ❖ ❖ Sub-net Mask
A number used to mathematically "mask" or hide an IP address on the net-
work by eliminating those parts of the address that are alike for all the ma-
chines on the network.
Note
❒ Default: 000.000.000.000
❒ Press the[← ← ← ← ] or [→ → → → ] key to move between each group of three numbers.
❒ Press [Clear] if you enter the wrong number.
❖ ❖ ❖ ❖ Gateway Address
A gateway is a connection or interchange point that connects two networks.
Configure the gateway address for the router or host computer used as a gate-
way.
Note
❒ Default: 000.000.000.000
❒ To get the address, contact your network administrator.
❖ ❖ ❖ ❖ Access Control and Access Mask
You can control the client access. Access control and Access mask should be
set together.
Note
❒ Default: 000.000.000.000
❒ If you do not want to set any limitation for this machine, use the default
settings.
❒ Press [Clear] if you enter the wrong number.
❒ If you set access control as 192.168.15.16, clients addresses might be as-
signed as follows:
Settings You Can Change with the User Tools
1 2
/ — /
2 2
4
79