Ricoh Aficio 1022 Operating Instructions Manual page 286

D D D D
Press the { { { { Interrupt} } } } key again.
The machine resumes the printing
job of the received fax document.
Resuming the interrupted
copying job
A A A A Reset the previous original.
B B B B Press the { { { { Start} } } } key.
The machine resumes the inter-
rupted copy run.
Copying and Multi-accessing
If you want to make copy while using
another function, follow the proce-
dure below.
A A A A
Press the { { { { Interrupt} } } } key.
The interrupt display appears on
the panel display.
B B B B
Place originals, and then press the
{ { { { Start} } } } key.
The machine interrupts the job that
is printing and starts copying your
originals.
C C C C
When copying is complete, re-
move your originals and the cop-
ies.
D D D D
Press the { { { { Interrupt} } } } key again.
The previous job settings will be
restored and the machine will con-
tinue from where it left off.
Note
❒ Machine operations are different
depending on the"Print Priori-
ty"settings (⇒ p.68 "General
1
Features / ") or the "User Code
2
Management" (⇒ p.68 "General
1
Features / ") settings.
2
Reference
⇒ p.35 "Multi-Access"
❖ ❖ ❖ ❖ When "Print Priority" = "Fax",
"Printer", or "Display" (default)
The machine completes the op-
eration of the function set by
Print priority before performing
the operation of another func-
tion.
Limitation
❒ While the machine is per-
forming two-sided printing
in fax m ode, you cannot
make two-sided copies until
the printing ends.
❖ ❖ ❖ ❖ When "Print Priority" = "Inter-
leave"
The machine performs the oper-
ations in the order in which they
are initiated. If another function
is initiated during operation,
the machine completes the cur-
rent operation before perform-
ing the operation of the function
initiated.
Copy Mode
2
27