Manual Dial - Ricoh Aficio 1022 Operating Instructions Manual

Transmission Features

Manual Dial

The optional external telephone is required.
Pick up the handset of the optional
external telephone and dial. When
the line is connected and you hear a
high-pitched tone, press the { { { { Start} } } }
key to send your fax message. If, on
the other hand, you hear a voice at the
other end, continue your conversa-
tion as you would normally over the
telephone.
4
Limitation
❒ Manual Dial does not work with
ISDN lines.
❒ This feature is not available for the
optional Extra G3 Interface Unit.
❒ The result of a transmission with
manual dial is not mentioned in
the Transmission Result Report
(Immediate Transmission).
❒ When
the
changed to the Economy Trans-
mission mode, there is no sound
when you pick up the handset for
4 seconds (Max). You can operate
the machine after hearing a tone.
A A A A
Place your original, and then se-
lect any scan settings you require.
Reference
⇒ Chapter 2, "Setting Originals"
in the Basic Features manual
⇒ Chapter 2, "Scan Settings" in
the Basic Features manual
B B B B
Pick up the handset of the exter-
nal telephone.
You will hear a tone.
54
machine has just
C C C C
Dial.
The machine immediately dials the
destination.
Note
❒ If you make a mistake, replace
the external telephone and try
again from step
D D D D
When the line is connected and
you hear a high-pitched tone,
press the { { { { Start} } } } key to send your
fax message.
Note
❒ If you hear a voice, notify the
destination that you want to
send a fax message (ask them to
switch to Facsimile mode).
E E E E
Replace the handset of the exter-
nal telephone.
After transmission, the machine
will return to standby mode.
To stop transmission, press the
{ { { { Clear/Stop} } } } key and remove origi-
nals.
B
.