Ricoh Aficio 1022 Operating Instructions Manual page 608

Faxing
❒ After dialing a destination, start
the next procedure within 30 sec-
onds. If you do not, the destination
will be canceled. You can change
the interval before cancelation. ⇒
System Setting Manual
A A A A
Make sure that Memory Trans-
2
mission is selected.
If it is not, press the [Memory TX]
key.
B B B B
Place the original.
Limitation
❒ You can send the first pages
from the exposure glass then
the remaining pages from the
Document Feeder (ADF). After
you remove the last page from
the exposure glass, you have 60
seconds to insert the remaining
pages in the Document Feeder
(ADF).
❒ Note that you cannot place pag-
es on the exposure glass after
you have started using the Doc-
ument Feeder (ADF).
Note
❒ To store multiple page originals
from the exposure glass, place
them page by page.
❒ The original can be placed in ei-
t h e r t h e D o c u m e n t F e e d e r
(ADF) or Exposure Glass until
the { { { { Start} } } } key is pressed.
Reference
p.18 "Placing Originals"
26
C C C C
Make the necessary settings you
require.
Reference
⇒ p.36 "Scan Settings"
⇒ p.37 "Original Type"
⇒ p.38 "Image Density (Con-
trast)"
D D D D
Dial.
If you make a mistake, press the
{ { { { Clear/Stop} } } } key or [Clear] and enter
the correct number.
Reference
⇒ p.41 "Dialing"
⇒ p.44 "Quick Dials"
⇒ p.45 "Groups"
⇒ Chapter 4, "Chain Dial" and
"Redial" in the Advanced Fea-
tures manual