Ricoh Aficio 1022 Operating Instructions Manual page 558

Appendix
Message
Exceeded max. number of pages (500 pages)
per file.
Do you want to store the scanned pages as 1 file?
Exceeded max. number of stand-by files.
Try again after the data transmission is com-
pleted.
Exceeded max. page capacity per file.
Only the scanned data will be transmitted.
Scan the remaining data after transmission.
Memory is full.
Cannot scan.
Memory is full.
Cannot scan. Stored files delivery is only avail-
able.
Note
7
❒ These messages are shown alternately.
Memory is full.
Delete the unnecessary stored file.
Note
❒ These messages are shown alternately.
Memory is full.
Press [Transmit] to transmit the scanned data.
To delete the data, press [Cancel].
Memory is full. Scanning has been cancelled.
Do you want to store the scanned data?
Memory is full. Scanning has been cancelled.
Press [Transmit] to transmit the scanned data.
To delete the data, press [Cancel].
No destination is programmed for this
number.
68
Possible Cause and Action
The maximum number of pages per file is 500.
Specify whether to use the data or not. Scan
the page that could not read once more as a
new file.
There are 50 standby files in the sending queue
for the delivery server. Wait until files have
been sent.
Because the number of scanned pages reaches
the maximum value for delivery, only the data
already scanned is transmitted. Retransmit the
remaining pages.
Because of insufficient hard disk capacity, the
first page could not be fully scanned. Try one
of the following measures.
• Wait for a while and retry the scan operation.
• Reduce the scan area.
• Delete unneeded stored files.
There is not enough remaining hard disk ca-
pacity. No more files can be stored. Delete un-
needed files.
There is not enough remaining hard disk ca-
pacity. Delete unneeded files.
Because there is not enough hard disk capacity
in the machine, the page could only be partially
scanned. Specify whether to use the data or not.
Because there is not enough hard disk capacity
in the machine, the page could only be partially
scanned. Specify whether to use the data or not.
Because there is not enough hard disk capacity
in the machine, the page could only be partially
scanned. Specify whether to use the data or not.
The short ID number that can be assigned to
each destination is not programmed in the de-
livery server. Assign a correct number to each
destination.