Page Reduction; Sender's Own Fax Number Print; Cil/Tid Print - Ricoh Aficio 1022 Operating Instructions Manual

Ricoh aficio 1022: user guide
Hide thumbs Also See for Aficio 1022:
Table of Contents

Advertisement

Page Reduction

If you receive a message that is longer
than the paper in the cassette, usually
the machine prints it on two pages. If
you turn this feature on the machine
reduces the width and length of the
received image so that it will fit on
one page. If A4L paper size is loaded
and a message of B4L size is re-
ceived, the machine will reduce the
message to a single A4L sheet.
Note
❒ You can choose whether this fea-
ture is turned on. Set this with the
User Parameters. ⇒ p.141 "Chang-
ing the User Parameters"(Switch10,
Bit3)
Reference
⇒ p.90 "Page Separation and
Length Reduction"

Sender's Own Fax Number Print

Usually the sender's Fax Header is
printed on received messages. If the
sender has not programmed their Fax
Header, you will not be able to identi-
fy them. However, if you turn this
feature on, the sender's Own Name or
Own Fax Number is printed instead
so you can find out where the mes-
sage came from. ⇒ Chapter 3, "Initial
settings and Adjustment" in the Basic
Features manual
Note
❒ You can turn it on or off with the
User Parameters. ⇒ p.141 "Chang-
ing the User Parameters"(Switch02,
Bit3)

CIL/TID Print

The optional ISDN Unit is required.
Two features are provided for identi-
fication of messages received by G4
(ISDN). If turned on, this information
will be printed on every page.
The CIL (Call Identification Line) re-
fers to the combination of the receiv-
er's own fax number and name, the
sender's own fax number and name,
time, and page number. The TID re-
fers to the name programmed by the
sender in their Fax Header. ⇒ Chap-
ter 3, "Initial settings and Adjust-
ment" in the Basic Features manual
Limitation
❒ These features are available only
when receiving in G4 mode.
❒ If the sender's TID contains dou-
ble-byte characters (for example
Chinese characters), the TID will
not be printed even if TID Print is
turned on.
Note
❒ You can turn CIL and TID on or off
with the User Parameters. ⇒ p.141
" Ch an g in g t h e U s er P ara m e -
ters"(Switch02, Bit5 or Bit6)
Printing Functions
5
91

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aficio 102725222527221227125622 ... Show all

Table of Contents