Connecting The Network Cable To The Network - Ricoh Aficio 1022 Operating Instructions Manual

Note
❒ Consult your network administrator before connecting the machine to a net-
work.
❒ Make sure to use a properly shielded and grounded cable (UTP, STP, Catego-
ry/Type5) for the connection to the host computer (and/or HUB) in order to
meet FCC and EMC Directive 89/336/EEC emission guidelines.

Connecting the Network Cable to the Network

Limitation
❒ The IEEE1394 Board and the Network Interface Board cannot be installed at
the same time.
A A A A
Turn off the main power switch.
B B B B
Loop the network cable twice. The loops should be about 10cm (4") from
the end of the cable closest to the printer.
C C C C
Attach the ferrite core to the loops.
D D D D
Attach the network cable to the jack on the board.
E E E E
Connect the other end of the network cable to the network.
F F F F
Turn on the main power switch.
ZFFH210E
ZFFH030E
Connecting the Machine
1
7