Figure 13-5. Set Command Reset Parameters Window - Bay Networks Manager User Manual

Part 3 Customize Mode
• A
Reset Parameters
Confirm Auto Reset
changed parameters that require an Annex to be reset. You
can choose
Cancel
Confirm Auto Reset
notifying you.

Figure 13-5. Set Command Reset Parameters Window

• changes marked parameters that have valid values. For
Set
parameters that did not change, the message box lists error
conditions. For more information about errors, see
Identifying Errors in this chapter.
• The work area displays current values. If you entered
incorrect values, original values appear in the work area
and error messages appear in the message box.
Chapter 13 Viewing and Changing Parameters
window appears if you selected the
option from the pull-down menu and
to continue the process, or
Reset
to return to the window. If you did not select
Set
, Annex Manager resets Annexes without
Annex Manager User Guide
13-15