Understanding The Appletalk Window; Using Push Buttons; Changing Appletalk Window Settings - Bay Networks Manager User Manual

Chapter 11 Using the AppleTalk, IP, IPX, and LAT Windows
Changing Settings
Annex Manager User Guide
11-2

Understanding the AppleTalk Window

This window uses only the
• provides the AppleTalk zone name that the Annex
Default Zone
uses at start-up. You can enter a name using up to 32 characters.
You must use spaces to separate words (e.g.,
). To escape embedded spaces, use the backslash (\).
lab

Using Push Buttons

The window uses the
AppleTalk
push buttons. For detailed information about these buttons, see Chapter 5.

Changing AppleTalk Window Settings

You can enter new values for the
1. Display the AppleTalk window.
2. Enter a new value for the
3. Press
Apply
Annex Manager sets new values for the
field:
Default Zone
,
Apply Restore
window's
AppleTalk
Default Zone
.
Part 3 Customize Mode
general engineering
, , and
Help Close
field:
Default Zone
.
.
Default Zone