Part 1
Annex Manager Basics
Using SunNet Manager Discovery to Find Annexes
The Discovery tool uses the object identifier (OID) or system description
retrieved from a device through SNMP to specify which type of element
it will create. You must add components of each Annex model to the
file located in the
discover.conf
create Annex elements. For more information, please refer to Chapter 5
in the SunNet Manager Reference Manual.
Currently, all Annex models return the same OID for the
SunNet Manager Discovery cannot distinguish among Annex hardware
models.
To use the Discovery tool:
Add the following lines to the #MAPPINGS section:
Annex3
Micro Annex
Annex-II
Chapter 1
directory for Discovery to
/var/adm/snm
component.annex3
component.microannex
component.annexII
Annex Manager User Guide
Installing Annex Manager
object.
sysOid
1-11