Table of Contents
Advertisement
Chapter 13
Viewing and Changing Parameters
Displaying Values
Annex Manager User Guide
13-6
Using Push Buttons
provides push buttons at the bottom of the window:
Show
•
activates the
Apply
selections in the main window and on the
•
removes current output from the window.
Clear
•
displays the standard
Save Output
includes the default text directory. You can enter a file name in
the
field and press
Selection
window's output box, or press
Show
window.
Show
•
displays a window that explains the
Help
•
removes the
Close
Viewing Parameter Values
To check parameter values with the
1.
Select the level of detail you need using the
button.
When you select
names, MIB definitions, default values, and current values. If you
do not select it, the output box includes only parameter names and
current values.
2.
Select a port type and port number.
If you selected parameter groups that require port numbers, you
must use these fields. If your selections do not require this
information, you can skip this step.
3.
Choose
Apply
Values appear in the output box for the parameters you selected.
The level of detail in the box depends on your use of the
button.
Output
command based on your
Show
File Selection
to store the contents of the
OK
window from your display.
Show
command:
Show
the output box includes parameter
Verbose Output,
.
Part 3
Customize Mode
button.
Verbose Output
window, which
to return to the
Cancel
command.
Show
Verbose Output
Verbose
Advertisement
Table of Contents
