Understanding The Edit Modem Window - Bay Networks Manager User Manual

Chapter 9 Editing Modem Definitions

Understanding the Edit Modem Window

Annex Manager User Guide
9-2
Modem definitions reside in the Annex configuration file. D
definitions are stored in
values, Annex Manager copies the definition from the
in the Annex configuration file.
The definitions you create or change here apply to all ports and all
Annexes that use the same load host. Your changes may not apply
solely to the Annexes or ports you selected.
uses the following fields:
Edit Modem
• specifies the type of modem attached to the ports
Modem Name
or Annexes you selected. For Annexes with asynchronous
ports, this field automatically displays the name that appears in
the
Edit Async Port
Primary Rate Annexes, it displays the internal modem name
from the Annex configuration file.
• If this field displays an existing modem name,
Status String
Command
• If this field displays
provides default values in
, and
Command
default values or enter new values.
If you want to view or edit a definition for a modem other
than the one listed in the window, press
and select another name from the list.
(continued on next page)
files. If you change a definition that uses default
include
window's
Modem Name
,
Dialin Setup Command
display current values.
or is blank, Annex Manager
<undefined>
Connect Status String
Dialout Setup Command
Part 2 Setup Mode
efault modem
file and places it
include
field. For ISDN
Connect
, and
Dialout Setup
,
Dialin Setup
. You can use these
here
OK