Using Push Buttons; Changing Ip Window Settings; Figure 11-3. Reset Parameters Window - Bay Networks Manager User Manual

Part 3 Customize Mode
Changing Settings
Chapter 11

Using Push Buttons

The IP window uses the
buttons. For more information about these buttons, see Chapter 5.

Changing IP Window Settings

You can enter new values for the
selections for its RIP fields:
1. Display the
IP
2. Enter new values or change existing ones.
3. Press
Apply
The
Reset Parameters
option from the pull-down menu and if the settings you
Auto Reset
changed require Annex Manager to reset Annexes. If you did not
select
Confirm Auto Reset
notifying you.

Figure 11-3. Reset Parameters Window

Using the AppleTalk, IP, IPX, and LAT Windows
, ,
Apply Restore
window's address and change
IP
window.
.
window appears if you selected the
, Annex Manager rests Annexes without
Annex Manager User Guide
push
, and
Help Close
Confirm
11-5