Table of Contents
Advertisement
Displaying Annex Status Information
Displaying Status Information
A
nnex Manager retrieves information about the status of an Annex,
its ports, and its interfaces. Status commands display hardware and
software information as well as basic performance statistics. In addition,
Annex Manager provides the
identifies all Annexes known to a search device by retrieving its routing
table. This chapter describes these commands in the following sections:
•
Displaying Annex Status Information
•
Displaying Asynchronous Port Status Information
•
Displaying Interface Status Information
•
Displaying PRI CSU Internal Status Information
•
Displaying PRI Internal CSU Status Information
•
Displaying T1 Internal CSU Status Information
•
Displaying T1 Modem Calls Status Information
•
Displaying Dial VPN Services (DVS) Status Information
•
Identifying Annexes
All status windows are snapshots of current values: status commands
do not provide active polling of data. These commands and the
Discover Annexes
do not change Annex configurations.
You can display basic information about a single Annex using the
command. This section includes:
Status
•
Displaying the Annex Status Window
•
Understanding the Annex Status Window
command. This command
Discover Annexes
command provide information for display only and
Annex Manager User Guide
Chapter 17
Annex
17-1
Advertisement
Table of Contents
