Table of Contents
Advertisement
Chapter 16
Booting and Resetting Annexes
Using the Reset
Command
Annex Manager User Guide
16-14
Resetting an Annex
To reset an Annex:
1.
Create an Annex List and select one or more Annexes.
2.
Select
Reset
from the Configure menu.
The
window displays (see
Reset
3.
Choose the
Reset Option
You can select one option. For detailed information about these
options, refer to Choosing a Reset Option earlier in this chapter
and to the Remote Annex Administrator's Guide for UNIX.
terminates active connections to an Annex when you use the
Reset
,
All
All Async Ports
,
(Hard)
All T1 DS1 Ports (Soft)
and
Individual Internal Modems
If you selected the
Modem
skip step 4 and go to step 5.
4.
Enter a port type and port or modem number information in the
fields below the
You can use these fields only if you selected the
the
Individual Internal Modems
5.
Choose
Apply
A
Confirmation
Part 4
Figure
you need.
,
,
All Printer Ports
All Virtual Ports
,
All Internal Modems
options.
Individual Ports
option, continue to step 4. For all other options,
box.
Reset Options
option.
.
window appears.
Control and Status Commands
16-3).
,
All T1 DS1 Ports
,
Individual Ports
orthe
Individual Internal
or
Individual Ports
Advertisement
Table of Contents
