Selecting Call Default Settings; Using The Channels Window - Bay Networks Manager User Manual

Chapter 8 Setting ISDN Primary Rate Annex Values
Selecting Settings

Using the Channels Window

Annex Manager User Guide
8-10

Selecting Call Default Settings

This section gives you directions for using Annex Manager's
window.
To use the
Call Defaults
1. Display the
Call Defaults
2. Enter or change information in the Mode, Interface, Time, or
PPP Security boxes.
If you enter information and then need to return to the values that
displayed originally, you can press
3. Press
Apply
Annex Manager changes values for the ISDN Primary Rate
Annexes you selected. You cannot use
.
Apply
Setup mode's
Channels
a B-channel for SLIP or PPP connections.
window:
window.
Restore
.
window allows you to assign a remote address to
Part 2 Setup Mode
Call Defaults
.
after you press
Restore