Understanding The Edit Async Ports (Continued) Window - Bay Networks Manager User Manual

Part 2 Setup Mode
Understanding the Edit Async Ports (continued)
Window
The
Edit Async Ports (continued)
settings in
PPP Security
The box defines data for authorization on a remote PPP peer.
PPP Security
This box uses the following fields:
•
Remote Username
identifies itself when the remote PPP peer asks for
authentication. This name can contain up to 15 characters.
•
Remote Password
when the remote PPP peer requests authentication. For security
reasons, Annex Manager displays this parameter's value as
or . This name can contain up to 15 characters.
unset
The box defines activity on the ports you selected and controls
Time
inactivity timers.
•
CLI Inactivity Timer
the Annex remains idle before disconnecting a CLI session
from a port. Entering 0 (zero) disables the timer; entering 255
causes the Annex to disconnect as soon as it exits from its last
job. You can enter any number of minutes up to 255. Unlike the
port inactivity timer, this timer does not disconnect a CLI
session with active jobs.
•
Port Inactivity Timer
can remain inactive. If the timer expires, the Annex terminates
all sessions and resets the port. You can use the
and
Output Is Activity
or output from the port. If you do not use these buttons, the
timer runs independent of activity. You can enter any number of
minutes up to 255 minutes.
Chapter 7 Setting Asynchronous Port Values
window provides access to additional port
, , and boxes.
Time LAT
contains the user name by which the Annex
defines the password that the Annex uses
specifies the amount of time in minutes that
specifies the number of minutes that a port
buttons to define activity as input to the port
Annex Manager User Guide
set
Input is Activity
7-15