Selecting Async Port Settings - Bay Networks Manager User Manual

Chapter 7 Setting Asynchronous Port Values

Selecting Async Port Settings

Selecting Ports
Annex Manager User Guide
7-16
•
Input Is Activity
button, the Annex resets the inactivity timer when it receives
On
input at the port.
•
Output Is Activity
the button, the Annex resets the inactivity timer when it
On
sends output from the port.
The box defines group codes.
LAT
•
Authorized Groups
codes that are accessible to users on an Annex port. You can
enter all, none, a series of numbers separated by commas (e.g.,
1, 5, 7) or a range of numbers separated by dashes (e.g., 1, 5,
200-255). You can use any number between 0 and 255.
Using Push Buttons
The
Edit Async Ports (continued)
push buttons. For detailed information about push buttons, see
Cancel
Chapter 5.
This section gives you directions for using Annex Manager's three
windows.
Ports
Before you can change port settings, you need to select specific ports:
1. Create an Annex list, select one or more Annexes, and press
.
Setup
The window appears.
General
2. Select
Async Ports
The
Async Ports
buttons define activity as input. If you click the
buttons defines activity as output. If you click
specifies the LAT protocol remote group
window uses the
from the button.
Setup
window appears.
Part 2 Setup Mode
, , and
OK Help
Async