Disable Rmon; Create Rmon Alarm - D-Link DES-1210-52/ME Cli Reference Manual

disable rmon

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the RMON feature on the Switch:

create rmon alarm

Purpose
Syntax
Description
Parameters
DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
Command: enable rmon
Success.
DES-1210-52/ME:5#
To disable remote monitoring (RMON) status for the SNMP function.
disable rmon
The disable rmon command disables remote monitoring (RMON)
status for the SNMP function on the Switch.
None.
Only Administrator or operator-level users can issue this command.
DES-1210-52/ME:5# disable rmon
Command: disable rmon
Success.
DES-1210-52/ME:5#
To allow the user to configure the network alarms. Network alarms
occur when a network problem, or event, is detected.
create rmon alarm <alarm_index 1-65535> <OID_variable 255>
<interval 1-2147482647> [absolute | delta] rising-threshold
<value 0-2147483647> <rising_event_index 1-65535> falling-
threshold <value 0-2147483647> <falling_event_index 1-65535>
{[owner <owner_string 32>]}
The create rmon alarm command allows the user to configure the
network alarms. Network alarms occur when a network problem, or
event, is detected.
<alarm_index> − Specifies the alarm number.
<OID_variable 255> − Specifies the MIB variable value.
<interval 1-2147482647> − Specifies the alarm interval time in
seconds.
[absolute | delta] − Specifies the sampling method for the selected
variable and comparing the value against the thresholds. The
possible values are absolute and delta:

absolute –Compares the values directly with the thresholds
at the end of the sampling interval.

delta –Subtracts the last sampled value from the current
value. The difference in the values is compared to the
threshold.
rising-threshold <value 0-2147483647> − Specifies the rising
204