Channel Config - D-Link DSL-124 User Manual
Wireless n300 adsl2+ modem router
Hide thumbs
Also See for DSL-124:
- Quick installation manual (8 pages) ,
- User manual (2 pages) ,
- Modem configuration manual (2 pages)
Table of Contents
Advertisement
Section 4 - Configuration
Channel Config
Click Internet Setup on the left menu to configure your connection manually.
This section is only recommended for advanced users. It is recommended to use the
Setup Wizard to set up your Internet connection.
The following sections describe how to Create a New Connection, Modify an existing
connection, or Delete a connection.
WAN PHYSICAL TYPE
Allows you to choose DSL WAN or Ethernet WAN. If you choose Ethernet WAN,, LAN Port
4 is used as the WAN port.
DEFAULT ROUTE SELECTION
Choose Auto or Specified. Auto is recommended for most configurations. Specified
allows you to customize WAN IP settings for unusual routing configurations.
CHANNEL CONFIGURATION
This panel is for manually configuring your WAN connection. It's options change
depending on other selections and is described in detail beginning on page 35.
D-Link DSL-124 Wireless N300 ADSL2+ Modem Router User Manual
33
Advertisement
Table of Contents
