Figure 3-10. Deleting Files - Enterasys Matrix-V V2H124-24 Configuration Manual

To delete a file, select System, File, Delete. Select the file name from the given list
by checking the tick box and then click Apply. Note that t
the startup code cannot be deleted.
CLI – To download new firmware form a TFTP server, enter the IP address of the
TFTP server, select "opcode" as the file type, then enter the source and destination
file names. When the file has completed the download, set the new file to start up
the system and then restart the switch.
To start the new firmware, enter the "reload" command or reboot the system.
Console#copy tftp file
TFTP server ip address: 10.1.0.99
Choose file type:
1. config: 2. opcode 3. PD_Controller: <1-3>: 2
Source file name: MCD0121.bix
Destination file name: mcd0121.bix
/
Console#config
Console(config)#boot system opcode: mcd0121.bix
Console(config)#exit
Console#reload
Note: It is possible to download a PoE PD_Controller file to a non-PoE switch, doing so
will not cause any adverse effects.

Figure 3-10. Deleting Files

Basic Configuration
he file currently designated as
3
4-66
4-71
4-22
3-19