Radius-Server Port; Radius-Server Key - Enterasys Matrix-V V2H124-24 Configuration Manual

4
Command Line Interface

radius-server port

This command sets the RADIUS server network port. Use the no form to restore the
default.
Syntax
radius-server port port_number
no radius-server port
port_number - RADIUS server UDP port used for authentication
messages. (Range: 1-65535)
Default Setting
1812
Command Mode
Global Configuration
Example
Console(config)#radius-server port 181
Console(config)#

radius-server key

This command sets the RADIUS encryption key. Use the no form to restore the
default.
Syntax
radius-server key key_string
no radius-server key
key_string - Encryption key used to authenticate logon access for client.
Do not use blank spaces in the string. (Maximum length: 20 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#radius-server key green
Console(config)#
4-88