Figure 3-13. Console Port Settings - Enterasys Matrix-V V2H124-24 Configuration Manual

3
Configuring the Switch
Web – Click System, Line, Console. Specify the console port connection parameters
as required, then click Apply.
CLI – Enter Line Configuration mode for the console, then specify the connection
parameters as required. To display the current console port settings, use the show
line command from the Normal Exec level.
Console(config)#line console
Console(config-line)#login local
Console(config-line)#password 0 secret
Console(config-line)#timeout login response 0
Console(config-line)#exec-timeout 0
Console(config-line)#password-thresh 5
Console(config-line)#silent-time 60
Console(config-line)#databits 8
Console(config-line)#parity none
Console(config-line)#speed auto
Console(config-line)#stopbits 1
Console(config-line)#end
Console#show line
Console configuration:
Password threshold:
Interactive timeout: Disabled
Login timeout: Disabled
Silent time:
Baudrate:
Databits:
Parity:
Stopbits:
VTY configuration:
Password threshold:
Interactive timeout: 600 sec
Login timeout: 300 sec
Console#
3-24

Figure 3-13. Console Port Settings

5 times
60
auto
8
none
1
3 times
4-10
4-11
4-12
4-13
4-13
4-14
4-15
4-15
4-16
4-17
4-17
4-18