Multicast Filtering Commands; Table 4-69. Multicast Filtering Commands - Enterasys Matrix-V V2H124-24 Configuration Manual

4
Command Line Interface
Example
Console#show map ip dscp ethernet 1/1
DSCP mapping status: disabled
Port DSCP COS
--------- ---- ---
Eth 1/ 1
Eth 1/ 1
Eth 1/ 1
Eth 1/ 1
.
.
.
Eth 1/ 1 61
Eth 1/ 1 62
Eth 1/ 1 63
Console#
Related Commands
map ip dscp (Global Configuration) (4-220)
map ip dscp (Interface Configuration) (4-220)

Multicast Filtering Commands

This switch uses IGMP (Internet Group Management Protocol) to query for any
attached hosts that want to receive a specific multicast service. It identifies the ports
containing hosts requesting a service and sends data out to those ports only. It then
propagates the service request up to any neighboring multicast switch/router to
ensure that it will continue to receive the multicast service.
Command Groups
IGMP Snooping
IGMP Query (Layer 2)
Static Multicast Routing
4-224
0 0
1 0
2 0
3 0
0
0
0

Table 4-69. Multicast Filtering Commands

Function
Configures multicast groups via IGMP snooping or static assignment,
sets the IGMP version, displays current snooping and query settings,
and displays the multicast service and group members
Configures IGMP query parameters for multicast filtering at Layer 2
Configures static multicast router ports
Page
4-225
4-228
4-232