Table 4-54. Show Lacp Output Contents - Enterasys Matrix-V V2H124-24 Configuration Manual

4
Command Line Interface
Console#show lacp 1 internal
Channel group : 1
-------------------------------------------------------------------------
Oper Key : 4
Admin Key : 0
Eth 1/1
-------------------------------------------------------------------------
LACPDUs Internal : 30 sec
LACP System Priority : 32768
LACP Port Priority : 32768
Admin Key : 4
Oper Key : 4
Admin State : defaulted, aggregation, long timeout, LACP-activity
Oper State : distributing, collecting, synchronization, aggregation,
.
.
.
Field
Oper Key
Admin Key
LACPDUs Internal
LACP System Priority LACP system priority assigned to this port channel.
LACP Port Priority
Admin State,
Oper State
4-172
long timeout, LACP-activity

Table 4-54. Show LACP Output Contents

Description
Current operational value of the key for the aggregation port.
Current administrative value of the key for the aggregation port.
Number of seconds before invalidating received LACPDU information.
LACP port priority assigned to this interface within the channel group.
Administrative or operational values of the actor's state parameters:
• Expired – The actor's receive machine is in the expired state;
• Defaulted – The actor's receive machine is using defaulted operational partner
information, administratively configured for the partner.
• Distributing – If false, distribution of outgoing frames on this link is disabled; i.e.,
distribution is currently disabled and is not expected to be enabled in the absence
of administrative changes or changes in received protocol information.
• Collecting – Collection of incoming frames on this link is enabled; i.e., collection is
currently enabled and is not expected to be disabled in the absence of
administrative changes or changes in received protocol information.
• Synchronization – The System considers this link to be IN_SYNC; i.e., it has been
allocated to the correct Link Aggregation Group, the group has been associated
with a compatible Aggregator, and the identity of the Link Aggregation Group is
consistent with the System ID and operational Key information transmitted.
• Aggregation – The system considers this link to be aggregatable; i.e., a potential
candidate for aggregation.
• Long timeout – Periodic transmission of LACPDUs uses a slow transmission rate.
• LACP-Activity – Activity control value with regard to this link. (0: Passive; 1: Active)