4
Command Line Interface
show bridge-ext
Use this command to show the configuration for bridge extension commands.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
See "Displaying Basic VLAN Information" on page 3-147 and "Displaying
Bridge Extension Capabilities" on page 3-12 for a description of the displayed
items.
Example
Console#show bridge-ext
Max support vlan numbers:
Max support vlan ID:
Extended multicast filtering services:
Static entry individual port:
VLAN learning:
Configurable PVID tagging:
Local VLAN capable:
Traffic classes:
Global GVRP status:
GMRP:
Console#
switchport gvrp
Use this command to enable GVRP for a port. Use the no form to disable it.
Syntax
[no] switchport gvrp
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Example
Console(config)#interface ethernet 1/1
Console(config-if)#switchport gvrp
Console(config-if)#
4-208
255
4094
No
Yes
IVL
Yes
No
Enabled
Disabled
Disabled