Show Spanning-Tree Mst Configuration; Vlan Commands; Editing Vlan Groups; Table 4-59. Vlan Commands - Enterasys Matrix-V V2H124-24 Configuration Manual

4
Command Line Interface

show spanning-tree mst configuration

This command shows the configuration of the multiple spanning tree.
Command Mode
Privileged Exec
Example
Console#show spanning-tree mst configuration
Mstp Configuration Information
--------------------------------------------------------------
Configuration name:XSTP REGION 0
Revision level:0
Instance Vlans
--------------------------------------------------------------
1 2
Console#

VLAN Commands

A VLAN is a group of ports that can be located anywhere in the network, but
communicate as though they belong to the same physical segment. This section
describes commands used to create VLAN groups, add port members, specify how
VLAN tagging is used, and enable automatic VLAN registration for the selected
interface.
Command Groups

Editing VLAN Groups

Configuring VLAN
Interfaces
Displaying VLAN
Information
Editing VLAN Groups
Command
vlan database
vlan
4-198

Table 4-59. VLAN Commands

Function
Sets up VLAN groups, including name, VID and state
Configures VLAN interface parameters, including ingress and egress
tagging mode, ingress filtering, PVID, and GVRP
Displays VLAN groups, status, port members, and MAC addresses

Table 4-60. Editing VLAN Groups

Function
Enters VLAN database mode to add, change, and delete
VLANs
Configures a VLAN, including VID, name and state
Page
4-198
4-200
4-206
Mode Page
GC 4-199
VC 4-199