Enabling Snmp; Table 3-4. Snmpv3 Security Models And Levels; Figure 3-22. Enabling The Snmp Agent - Enterasys Matrix-V V2H124-24 Configuration Manual

3
Configuring the Switch
Model Level
v1 noAuthNoPriv
v1 noAuthNoPriv
v1 noAuthNoPriv
v2c noAuthNoPriv
v2c noAuthNoPriv
v2c noAuthNoPriv
v3 noAuthNoPriv
v3 AuthNoPriv
v3 AuthPriv
Note: The predefined default groups and view can be deleted from the system.

Enabling SNMP

Enables the SNMP agent on the switch for all versions (1, 2c, and 3).
Command Attributes
• SNMP Agent Status – Enables SNMP on the switch.
Web - Click SNMP, Agent Status. Enable the SNMP Agent by marking the Enabled
checkbox, and click Apply.
CLI – The following example enables SNMP on the switch.
Console(config)#snmp-server
Console(config)#
3-36

Table 3-4. SNMPv3 Security Models and Levels

Group Read View
DefaultROGroup defaultview
DefaultRWGroup defaultview
user defined user defined user defined
DefaultROGroup defaultview
DefaultRWGroup defaultview
user defined user defined user defined
user defined user defined user defined
user defined user defined user defined
user defined user defined user defined

Figure 3-22. Enabling the SNMP Agent

Write View Security
none Community string only
defaultview Community string only
Community string only
none Community string only
defaultview Community string only
Community string only
A user name match only
Provides user authentication
via MD5 or SHA algorithms
Provides user authentication
via MD5 or SHA algorithms
and data privacy using DES
56-bit encryption
4-143