4
Command Line Interface
Field
Syslog logging
REMOTELOG status
REMOTELOG
facility type
REMOTELOG level type The severity threshold for syslog messages sent to a remote server as specified in
REMOTELOG
server IP address
Related Commands
show logging (4-49)
SMTP Alert Commands
Configures SMTP event handling, and forwarding of alert messages to the specified
SMTP servers and email recipients.
Command
logging sendmail host
logging sendmail level
logging sendmail
source-email
logging sendmail
destination-email
logging sendmail
show logging sendmail
logging sendmail host
This command specifies SMTP servers that will be sent alert messages. Use the no
form to remove an SMTP server.
Syntax
[no] logging sendmail host ip_address
ip_address - IP address of an SMTP server that will be sent alert
messages for event handling.
Default Setting
None
Command Mode
Global Configuration
4-50
Table 4-18. Remote Logging
Description
Shows if system logging has been enabled via the logging on command.
Shows if remote logging has been enabled via the logging trap command.
The facility type for remote logging of syslog messages as specified in the logging
facility command.
the logging trap command.
The address of syslog servers as specified in the logging host command.
Table 4-19. SMTP Commands
Function
SMTP servers to receive alert messages
Severity threshold used to trigger alert messages
Email address used for "From" field of alert messages
Email recipients of alert messages
Enables SMTP event handling
Displays SMTP event handler settings
Mode
Page
GC
4-50
GC
4-51
GC
4-52
GC
4-52
GC
4-53
NE, PE
4-53